|
|
|
All tensile testing was done in accordance with ASTM E8. The data consists of the average results from a minimum of two and as many as ten samples. Yield strength was determined by the 0.2% offset method. Plastic elongation is as measured in a two inch gauge length.
Alloy 309
| Test Temperature |
Yield Strength |
Tensile Strength |
Elongation |
| (°F) |
(°C) |
ksi |
MPa |
ksi |
MPa |
% |
| 77 |
25 |
42.0 |
290 |
90.0 |
621 |
49 |
| 400 |
204 |
35.0 |
241 |
80.0 |
552 |
46 |
| 800 |
427 |
30.0 |
207 |
72.0 |
497 |
40 |
| 1000 |
538 |
24.0 |
166 |
66.0 |
455 |
36 |
| 1200 |
649 |
22.0 |
152 |
55.0 |
379 |
35 |
| 1400 |
760 |
20.0 |
138 |
36.0 |
248 |
40 |
| 1600 |
871 |
18.5 |
128 |
21.0 |
145 |
50 |
| 1800 |
982 |
-- |
-- |
10.1 |
69 |
65 |
Alloy 309S
| Test Temperature |
Yield Strength |
Tensile Strength |
Elongation |
| (°F) |
(°C) |
ksi |
MPa |
ksi |
MPa |
% |
| 77 |
25 |
50.9 |
351 |
97.1 |
670 |
44.6 |
| 200 |
93 |
44.7 |
308 |
88.8 |
612 |
29.0 |
| 400 |
204 |
37.4 |
258 |
81.7 |
563 |
34.5 |
| 600 |
316 |
33.4 |
230 |
80.2 |
553 |
31.6 |
| 800 |
427 |
29.6 |
204 |
77.1 |
531 |
32.1 |
| 900 |
482 |
30.4 |
210 |
74.7 |
515 |
32.0 |
| 1000 |
538 |
26.7 |
184 |
71.2 |
491 |
26.6 |
| 1100 |
593 |
26.5 |
182 |
65.6 |
452 |
25.5 |
| 1200 |
649 |
24.7 |
170 |
55.9 |
386 |
28.8 |
| 1300 |
704 |
23.7 |
163 |
55.7 |
384 |
-- |
| 1400 |
760 |
22.2 |
153 |
36.0 |
248 |
22.5 |
| 1500 |
816 |
20.1 |
138 |
24.7 |
170 |
64.8 |
| 1600 |
871 |
16.6 |
114 |
20.7 |
142 |
73.3 |
| 1700 |
927 |
13.1 |
90 |
15.4 |
106 |
78.7 |
| 1800 |
982 |
8.2 |
56 |
10.8 |
74 |
-- |
| 1900 |
1038 |
4.6 |
32 |
6.6 |
46 |
-- |
Alloy 310
| Test Temperature |
Yield Strength |
Tensile Strength |
Elongation |
| (°F) |
(°C) |
ksi |
MPa |
ksi |
MPa |
% |
| 77 |
25 |
42.4 |
292 |
89.5 |
617 |
45 |
| 400 |
204 |
31.5 |
217 |
76.6 |
528 |
37.5 |
| 800 |
427 |
27.2 |
188 |
74.8 |
516 |
37 |
| 1000 |
538 |
24.2 |
167 |
70.1 |
483 |
36 |
| 1200 |
649 |
22.6 |
156 |
57.2 |
394 |
41.5 |
| 1500 |
816 |
19.7 |
136 |
30.3 |
209 |
66 |
| 1800 |
982 |
-- |
-- |
11.0 |
76 |
65 |
| 2000 |
1093 |
-- |
-- |
7.0 |
48 |
77 |
Alloy 310S
| Test Temperature |
Yield Strength |
Tensile Strength |
Elongation |
| (°F) |
(°C) |
ksi |
MPa |
ksi |
MPa |
% |
| 77 |
25 |
45.6 |
314 |
90.5 |
624 |
42.6 |
| 200 |
93 |
41.4 |
286 |
83.4 |
575 |
41.3 |
| 400 |
204 |
36.9 |
254 |
77.3 |
533 |
35.8 |
| 600 |
316 |
34.6 |
239 |
75.2 |
519 |
35.0 |
| 800 |
427 |
30.3 |
209 |
73.6 |
508 |
33.5 |
| 1000 |
538 |
29.4 |
203 |
70.2 |
484 |
37.0 |
| 1200 |
649 |
25.8 |
178 |
57.0 |
393 |
32.0 |
| 1400 |
760 |
21.4 |
147 |
37.7 |
260 |
54.0 |
| 1600 |
871 |
16.1 |
111 |
22.5 |
155 |
56.5 |
| 1800 |
982 |
8.2 |
56 |
11.8 |
81 |
93.3 |
| 2000 |
1093 |
4.0 |
27 |
6.5 |
44 |
121.0 |
Back to 310S
General Properties
Chemical Composition
Aqueous Corrosion Resistance
Physical Properties
Typical Short-Term Mechanical Properties
Elevated Temperature Oxidation Resistance
Heat Treatment
Fabrication Characteristics
Application
Welding
Other Forms of Degradation
|
|