Jiangyin Donghao Stainless Steel Pipe Co., Ltd  
  Portugal | Japanese | Русский | España | Deutsch | English | Chinese Sitemap | Forum   

    Products

Standard






ASTM A694 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service covers carbon and alloy steel forgings for pipe flanges, fittings, valves, and parts for high-pressure transmission service. A chemical heat analysis of the steel shall be made, and the steel shall conform to specified chemical composition requirements. Materials adhere to testing and tensile property requirements as well.

1.1 This specification covers forged or rolled steel pipe flanges, forged fittings, valves, and parts suitable for use with high-strength transmission-service pipe. Included are flanges, fittings, and similar parts ordered either to dimensions specified by the purchaser or to ASME or MSS dimensional standards referenced in Section 2.

1.2 Several grades of material, based on minimum yield strength requirements, are covered, as indicated in Table 1.

1.3 Supplementary Requirements are provided. Supplementary Requirement S 1 is provided for use when purchaser approval is required for repair welding.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable “M”specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.

TABLE 1 Tensile Requirements

Grade
Yield Strength (0.2 % Offset), min, ksi [MPa]
Tensile Strength,
min, ksi [MPa]
Elongation in 2 in. or 50 mm, min %
F42 42 [290] 60 [415] 20
F46 46 [315] 60 [415] 20
F48 48 [330] 62 [425] 20
F50 50 [345] 64 [440] 20
F52 52 [360] 66 [455] 20
F56 56 [385] 68 [470] 20
F60 60 [415] 75 [515] 20
F65 65 [450] 77 [530] 20
F70 70 [485] 82 [565] 18


ASTM A53/A53M Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A106/A106M Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A381 Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
ASTM A707/A707M Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
ASTM A788/A788M Specification for Steel Forgings, General Requirements
ASTM A961/A961M Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

high strength low alloy steel; pipe fittings, steel; piping applications; pressure containing parts; steel flanges; steel forgings, alloy; steel forgings, carbon; steel valves; Alloy steel forgings--specifications; Carbon steel forgings--specifications; High pressure service applications--specifications; High-temperature service applications--steel forgings; Steel fittings--specifications; Steel flanges--specifications; Steel valves--specifications ;

ICS Code

ICS Number Code 77.140.85 (Iron and steel forgings)