STAINLESS STEEL TUBE & PIPE   
  Portugal | Japanese | Русский | España | Deutsch | English | Chinese Sitemap Home
 

    Products
HOME
ABOUT US
ABOUT STAINLESS
PRODUCTS
Products Center
Standard (Norm)
Pipe Specification
Pipe Material(Grade)
Chemical Composition
Mechanical Properties
Technology Flow chart
Range of Applications
QUALIFICATION
EQUIPMENTS
Production Equipment
Inspection Equipment
QUALITY&SERVICE
Warranty
Service
INDUSTRY NEWS
ENQUIRY US
CONTACT US

Properties





EN 10088-3 gives the mechanical properties for stainless steel semi-finished products, bars, rods and sections for general purposes. The properties given in this article are proof strength, tensile strength, elongation and hardness of martensitic and precipitation hardening stainless steel.

EN 10088-3 was originally published in 1995. The second, current version, EN 10088-3:2005, has superseded EN 10088-3:1995, which was withdrawn by BSi on 20th June 2005.

The tables shown here only have the 2005 tensile strength properties ranges of the martensitic and precipitation hardening steel. Of the new grades added in the 2005 edition the following appear as bright bar

Special martensitic stainless steel grade 1.4035

Special precipitation hardening grade 1.4606

This article is specfically for bright products which were introduced in the 2005 edition. N 10088-3 mechanical properties - martensitic and precipitation hardening stainless steel bright bar including lengths cut from wire



Designation Max Thickness mm 1) Mechanical properties min unless stated
Annealed Heat Treated
Steel name Steel number Tensile strength RmN/mm2 max Hardness HB max2) Heat Treatment Condition Proof strength Rp0.2N/mm2 Tensile strength RmN/mm2 Elongation A %3)
Standard Martensitic Grades
X12Cr13 1.4006/410 104) 880 280 QT650 550 700/1000 9
10<16 880 280 500 700/1000 9
16<40 800 250 450 650/930 10
40<63 760 230 450 650/880 10
63<160 730 220 450 650/850 15
X12CrS13 1.4005/416 104) 880 280 QT650 550 700/1000 8
10<16 880 280 500 700/1000 8
16<40 800 250 450 650/930 10
40<63 760 230 450 650/880 10
63<160 730 220 450 650/850 12
X20Cr13 1.4021/420 104) 910 290 QT700 600 750/1000 8
10<16 910 290 550 750/1000 8
16<40 850 260 500 700/950 10
40<63 800 250 500 700/900 12
63<160 760 230 500 700/850 13
X30Cr13 1.4028/420F 104) 950 305 QT850 700 900/1050 7
10<16 950 305 650 900/1150 7
16<40 900 280 650 850/1100 9
40<63 840 260 650 850/1050 9
63<160 800 245 650 850/1000 10
X39Cr13 1.4031 104) 950 305 QT800 700 850/1100 7
10<16 950 305 700 850/1100 7
16<40 900 280 650 800/1050 8
40<63 840 260 650 800/1000 8
63<160 800 245 650 800/1000 10
X46Cr13 1.4034 104) 950 305 QT850 700 900/1150 7
10<16 950 305 700 900/1150 7
16<40 900 280 650 850/1100 8
40<63 840 260 650 850/1000 8
63<160 800 245 650 850/1000 10
X14CrMoS17 1.4104/430F 104) 880 280 QT650 580 700/980 7
10<16 880 280 530 700/980 7
16<40 800 250 500 650/930 9
40<63 760 230 500 650/880 10
63<160 730 220 500 650/850 10
X39CrMo17-1 1.4122 104) 1000 340 QT750 650 800/1050 8
10<16 1000 340 600 800/1050 8
16<40 980 310 550 800/1000 10
40<63 930 290 550 750/950 12
63<160 900 280 550 750/950 12
X17CrNi16-2 1.4057/431 104) 1050 330 QT800 750 850/1100 7
10<16 1050 330 700 850/1100 7
16<40 1000 310 650 800/1050 9
40<63 950 295 650 800/1000 12
63<160 950 295 650 800/950 12
X4CrNiMo16-5-1 1.4418 104) 1150 380 QT900 750 900/1150 10
10<16 1150 380 750 900/1150 10
16<40 1100 320 700 900/1100 12
40<63 1100 320 700 900/1100 16
63<160 1100 320 700 900/1100 16
160<250 1100 320 700 900/1100 14
Special Martensitic Grades
X29CrS13 1.4029 104) 950 305 QT850 750 900/1100 8
10<16 950 305 700 900/1100 8
16<40 900 280 650 850/1100 10
40<63 840 260 650 850/1050 10
63<160 800 245 650 850/1000 12
X46CrS13 1.4035 104) 880 280 - - - -
10<16 880 280 - - -
16<40 800 250 - - -
40<63 760 230 - - -
Standard Precipitation Hardening Grades
X5CrNiCuNb16-4 1.4542/630 104) 1200 360 P800 600 900/1100 10
10<16 1200 360 600 900/1100 10
16<40 1200 360 520 800/1050 12
40<63 1200 360 520 800/1000 18
63<160 1200 360 520 800/950 18
<100 - - P930 720 930/1100 12
<100 - - P960 790 960/1160 10
<100 - - P1070 1000 1070/1270 10
Special Precipitation Hardening Grades
X5NiCrTiMoVB25-15-2 1.4606 104) 850 240 P880 750 950/1200 15
10<16 800 230 750 950/1150 15
16<40 800 230 600 900/1150 18
40<63 700 212 550 880/1150 20

Note
  1. Width across flats for hexagons.
  2. For information only.
  3. Elongation is valid only for dimensions of 5mm and above. For smaller diameters, the minimum elongation has to agreed upon at the time of the enquiry and order
  4. In the range 1mm<<5mm valid only for rounds. The mechanical properties of non round bars with thicknesses < 5mm have to be agreed at the time of the enquiry and order



Related References:
1. EN 10088-3 Mechanical Properties of Martensitic Precipitation
2. EN 10088-3 Mechanical properties austenitic stainless steel bar
3. EN 10088-3 Mechanical Properties of Duplex Stainless Steel Bar
4. EN 10088-3 Duplex Steel Long Products Mechanical Properties
5. EN 10088-3 Mechanical Properties of Ferritic Stainless Steel
6. EN 10088-3 Mechanical properties austenitic stainless steel bar
7. EN 10088-3 Cold Worked Wire Mechanical Properties
8. EN 10088-3 Stainless Steel Long Products Grades
9. EN 10088-3 Mechanical Properties of ferritic steel long product
10. EN 10088-3 Mechanical Properties of Martensitic and Precipitation Hardening Stainless Steel Bright Bars
11. EN 10088-3 Mechanical of Martensitic and Precipitation Hardening Long Products
12. Permissible Analysis Tolerances on Cast Ranges in EN 10088-3


Properties | Tensile Strength | Yield Strength | Typical Yield | Typical Tensile | Yield strength & Yield point | Stainless Steel Tensile Strength | Bend Testing | Compression Testing | Difference Between Yield and Tensile | AISI Steel Yield Tensile | Strength Properties of Metals | Strength of Materials | Stress | Aluminum Mechanical Properties | Tensile Proof Stress Of Metric Bolts and Screws | Tensile Strength of Metric Nuts | Stainless Tensile Of Metric Bolts Screws | Physical Properties Stainless Steel Carbon Steel | Thermoplastics Physical Properties | British Standard Strength of Steel | Shear and Tensile | Elastic Properties Young Modulus | Stength European Standard | Ductility | Young's Modulus | Non-Ferrous Modulus of Elasticity | Steel Bolts Strength | Iron Steel Modulus of Elasticity | Thermal Properties | Properties of Thermal | Thread Shear Calculator | Metals Properties | Stainless Steel Physical Properties | Definition Mechanical Properties

    © Copyright Reserved   Home  |  Site Map   |  Links  |  Directory  |  Advertise  |   Heat  |  Tools  |  Standard  |  Pressure  |  Hardness  |  Surface   |  Metal Engineering
     E-mail: sales@stainless-steel-tube.org                                        
    Stainless Steel Pipe | Stainless Steel Tube | Stainless Steel Tubing | Heat Exchanger Tube | Duplex Stainless Steel Pipe | U Bend Tube