|
|
|
Sand Blasting is the use of compressed air stream sprayed on quartz sand stainless steel pipe surface clean-up or modification of the surface processing. Sand blasting can be divided into Dry sand blasting And Wet Sand Two kinds.
The role of blasting a lot, it can remove the stainless steel tube,castings, forgings, or after heat treatment the oxidation of the surface skin, but also can remove the surface rust materials, coke, welding slag and other debris, you can also place part of the edge of burr, some minor scratches direction. Sandblasting can also increase Stainless Part surface roughness, thereby enhancing the subsequent layer covering the surface echo power. Sandblasting can be used as a means of dealing with surface decoration, sandblasting the surface was matte after the state adopted for a number of industries.
Dry sand blasting before the first degreasing, and then dried, to avoid affecting the quality of sand, and then select the appropriate parts of the thickness of sand and air pressure. In general, greater the thickness of quartz sand sand , greater the degree of airflow is correspondingly larger.
Malpractices quartz sand wet sand and water mixed into the mortar, if necessary, can also be added sodium nitrite, and then use compressed air spray to the part surface. In terms of relative dry sand blasting, wet blasting eliminates air pollution caused by dust, and the surface also more delicate. We never take blasting on our tubes !
Pipes Tubes Plates Bars Square Tubes Weight Calculation Calculator
Conversion Calculator Calculation-Pressure|Weight|Temperature|Volume|Length
Pipe Working Pressure Calculation
Metals Weight Calculator Calculation
Stainless Steel Pipe Specifications
Stainless Steel Tube Dimension
Stainless Steel Tubes L H Grade
Stainless Steel Properties Description
Stainless Steel Cold Working Properties
304/304L/304LN/304H tubing and pipe
Stainless Steel Pipes Sizes
Stainless Steel-ASTM-Material Grade-Standard
Seawater Resistance of Stainless Steel Tubes
ASTMA312/A213/A269/A511/A376/A789/A790 DIN17456/17458 JIS3459/3463 DNV Chemical Compostion
International Conversion Table For Stainless Steel
Stainless Steel Relative Cost Data
Select Stainless Steel Grade by Characteristics and Usage
Selection of Stainless Steels from Corrosion Resistance, Mechanical Physical Properties
Select Materials for Heat Exchanger Tubes with Substantial Pressure difference
Select Stainless Steel by high temperature condition refer table
Properties at Cryogenic Temperatures of Stainless Steel Tubes
The Effect of carbon on corrosion resistance-304 316 304L 316L
Comparison of grades 316/1.4401 and 316L/1.4404/1.4432 to 316Ti /1.4571
The difference between Stainless Steel Tubing and Cooper Tubing in Shell and Tube Heat Exchanger
Various elements on the performance of stainless steel and the impact and role of organizations
Physical properties of stainless steel and Carbon steel
Compared with the ferritic stainless steel, duplex stainless steel vulnerable
Compared with the austenitic stainless steel, duplex stainless steel strengths and vulnerable
|
|
|