 |
Carbon Steel Pipe Standard ASTM BS DIN Sweden |
|
EN 10095 Mechanical Properties of Stainless Steel |
|
EN 10088-3 Mechanical Martensitic and Precipitation Hardening |
|
EN 10088-3 Mechanical Properties of Ferritic Stainless Steel |
|
EN 10088-2 Mechanical Properties of Martensitic Stainless Steel |
|
EN 10088-2 Mechanical Properties of Ferritic Stainless Steel |
|
EN 10088-2 Mechanical Properties of Duplex Stainless Steel |
|
EN 10088-3 Mechanical Properties of Duplex Stainless Steel Bar |
|
BS 1452-1990 for Gray Iron Castings |
|
ASTM A536 Standard for Ductile Iron |
|
ASTM A283 A285 A570 Mechanical Properties |
|
ISO8062 BS6615 Iron Steel Rough Casting Tolerance Standard |
|
BS3100 1991 Cast Steel Chemical Composition |
|
BS 6615 ISO 8062 Rough Casting Tolerance |
|
ASTM A48 Standard Specification for Gray Iron Castings |
|
ASTM Valve Standard |
|
ASTM Material Specification Fitting Flange Cast Forging Valve |
|
ASTM A694 F42 F46 F48 F50 F52 F56 F60 F65 F70 |
|
ISO 2768 Standard for Machining Tolerance |
|
DIN 1686 - Standard for Rough Casting General Tolerance |
|
ASTM A148 A148M Standard for High Strength Cast Steel |
|
Material Comparison Table DIN 1691 1693 and DIN EN 1561 |
|
EN 10217-7 Mechanical Properties for Stainless Steel |
|
Availability of Stainless Steel Long Products Grades from EN 10088-3 |
|
Availability of Stainless Steel Flat Grades EN 10088-2 |
|
JIS Pipe Tube Fitting Standard |
|
Comparing US American ASTM and British BS Piping Standard |
|
ISO Steel Pipe Tube and Fittings Standard and Specifications |
|
DIN Steel Pipe Tube and Fittings Standard and Specification |
|
DD ENV 1090 Part 6 Fabrication and Erection Secification for Stainless Steel |
|
Specifications Standard for Aluminium Alloys |
|
EN 10293:2005. Steel Castings for General Engineering Uses |
|
EN 10277-1:2008 Bright Steel Products Technical delivery conditions. General |
|
EN 10269 Chemical Compositions of Stainless Steel |
|
EN 10213 :2008 Steel Castings for pressure purposes |
|
EN 10149-1:1996: Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions |
|
EN 10132-1:2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions (T.D.C.)-General |
|
EN 10130:2006 Cold Rolled low-carbon steel flat products for cold forming - Technical delivery conditions |
|
EN 10088 Stainless Steels |
|
EN 10087 Free Cutting Steels- Technical Delivery conditions for semi-finished products hot rolled bars and rods |
|
EN 10083-1 :2006 Quenched and Tempered Steels - Technical Delivery Conditions for Special Steels |
|
EN 10025-1:2004 - Hot rolled products of structural steels. General technical delivery conditions |
|
EN 10028-1:2000 - Flat products made of Steel for Pressure Purposes:General Requirements |
|
EN 10027 Designation systems for steel. Steel names, principal symbols, Steel numbers |
|
EN 10079:1992- Definition of steel products |
|
EN 2516 - Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel base alloys |
|
EN 10028-7 Elevated Temperature Mechanical Properties for Stainless Steel |
|
EN 10272 Elevated and Sub-zero Temperature Mechanical Properties of Stainless Steel |
|
British Standard Strength of Steel |
|
Draft State Standard and Oil and Gas lines Standard |
|
British USA Standards For Stainless Steel for Pressure Vessel Applications |
|
BS 3605 Chemical Composition of Stainless Steel |
|
BS 6744 Chemical Composition and Mechanical Properties of Stainless Steel |
|
BS 2871 Copper Tube Working Pressure Dimension |
|
JIS-Japan Industrial Standards |
|
EN 10088-2 Chemical Composition Stainless Steel |
|
EN 10088-3 Chemical Composition Stainless Steel |
|
EN 10217-5 / A1 Welded steel tubes for pressure purposes |
|
EN 10217-7 Ambient temperature mechanical properties |
|
EN 10217-7 Chemical Compositions of Stainless Steel Pipes |
|
EN 10088-1 Elevated temperature physical properties of stainless steel |
|
EN 10088-1 Ambient temperature physical properties of stainless steel |
|
EN 10216-5 Ambient temperature mechanical properties |
|
EN 10216-5 Chemical compositions of stainless steels |
|
EN 10216-5 Stainless Steel Tube |
|
EN 10253-3 and 10253-4 Ambient temperature mechanical properties |
|
EN 10217-5/A1 Welded steel tubes for pressure purposes |
|
EN 10217-7 Chemical compositions of stainless steels |
|
EN 10088-1 Elevated temperature physical properties of stainless steel |
|
EN 10088-1 Ambient temperature physical properties of stainless steel |
|
DIN 2391. Seamless Precision Steel Tubes |
|
DIN 2393. Welded Precision Steel Tubes |
|
DIN 2394. As-Welded and Sized Precision Steel Tubes |
|
DIN 2395. Rectangular and Square Welded Precision Steel Tubes |
|
DIN 2440 & DIN 2441. Steel Tubes; Medium-Weight Suitable for Screwing & Heavy-Weight Suitable for Screwing |
|
DIN 17175. Seamless Tubes of Heat-Resistant Steels |
|
DIN 17458/2462. Seamless Circular Tubes of Austenitic Stainless Steels with Special Quality Requirements |
|
DIN 2391. Seamless Precision Steel Tubes |
|
DIN17459 Seamless Circular High-Temperature Austenitic Stainless Steel Tube Subject to Special Requirement |
|
API 5L. Line Pipes |
|
API 5CT. Tubings |
|
GOST 800-78. Bearing Tubes |
|
GOST 949-73. Small and Medium Volume Steel Cylinders for Gases |
|
GOST 949-73 & TU 14-3R-10-94. Steel Cylinders of Medium Volume with Concave Bottom for Gases |
|
GOST 3262-75. Water-supply and Gas-supply Steel Pipes |
|
GOST 8639-82. Square Steel Pipes |
|
GOST 8645-68. Rectangular Steel Tubes |
|
GOST 8732-78. Seamless Hot-Formed Steel Pipes |
|
GOST 8734-75. Seamless Steel Tubes Cold-Formed |
|
GOST 9940-81. Seamless Cold-Finished and Warm-Finished Tubes of Corrosion Resistant Steel |
|
GOST 9941-81. Seamless Cold-Finished and Warm-Finished Tubes of Corrosion Resistant Steel |
|
GOST 10704-91. Electrically Welded Steel Line-End Tubes |
|
GOST 14162-79. Steel Tubes of Small Dimensions (Capillary) |
|
GOST 19277-73. Seamless Steel Tubes for Oil and Fuel Lines |
|
TU 14-3R-55-2001 Steel pipes for high pressure boilers |
|
TU 14-159-263-96. Electrically Welded Cold-Formed and Seamless Precision Steel Pipes for Automotive Industry |
|
TU 14-159-233-94. Electrically Welded Steel Pipes for Household Refrigerators |
|
TU 14-3-796-79. Seamless Cold-Formed Pipes for Boilers from Stainless Steel |
|
TU 14-3-460-75. Seamless Steel Pipes for Steam Boilers and Pipelines |
|
UNS Number S4 GROUP Heat and Corrosion Resistant Steeels (Including Stainless), Valve Steels, and Iron Baes "Super alloys") |
|
ASTM A967 - Specification for Chemical Passivation Treatments for Stainless Steel Parts |
|
ASTM A380 - Practice for Cleaning, Descaling and Passivating of Stainless Steel Parts, Equipment and Systems |
|
ASTM Standards for Structural Tubing Mechanical Tubing Welded Fitting |
|
ASTM Standard for Heat-Exchanger and Condenser Tubes |
|
ASTM Standards for Steel Pipes |
|
ASTM Standards for Steel Tubes |
|
ASTM Standards for Steel Pipes |
|
ASTM A 53 & ASTM A 106. Welded and Seamless Black Pipes & Seamless Pipes from Carbon Steel, Intended for Operation by High Temperature |
|
ASTM A213/A450. Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat Exchanger Tubes |
|
ASTM A312/A999. Seamless Austenitic Stainless Steel Pipes |
|
ASTM A556M ASME SA556 Seamless cold drawn steel feedwater heater tubes |
|
ASTM E112 Standard Test Methods for Determining Average Grain Size |
|
ASTM A789-A789M SEAMLESS AND WELDED FERRITIC/AUSTENITIC STAINLESS STEEL TUBING FOR GENERAL SERVICE |
|
ASTM A213M/ASME SA213 SEAMLESS FERRITIC AND AUSTENITIC ALLOY STEEL BOILER SUPERHEATER AND HEAT EXCHANGER TUBES |
|
ASTM A312/ASME SA312 SEAMLESS AND WELDED AUSTENITIC STAINLESS STEEL PIPE |
|
A 269-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
|
ASTM A376M-8/ASME SA376 SEAMLESS AUSTENITIC STEEL PIPE FOR HIGH TEMPERATURE CENTRAL STATION SERVICE |
|
ASTM A 511/A 511M Standard Specification for Seamless Stainless Steel Mechanical Tubing |
|
ASTM A 790/A 790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
|
ASTM A249 Standard for Welded Austenitic Steel Boiler Superheater, Heat-Exchanger and Condenser Tubes
|
|
ASTM A 553/A 553M Standard Specification for Pressure Vessel Plates, Alloy Steel |
|
ASTM A106 / A106M - 08 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
|
A 923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steel |
|
A928 Standard for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
|
|
ASTM A556M-88/ASME 556 Seamless cold drawn steel feedwater heater tubes |
|
ASTM Standards-D |
|
ASTM Standards-C |
|
ASTM Standards-B |
|
ASTM Standards-A |
|
ASME B31 - Standards of Pressure Piping |
|
ASTM E213M-09 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |